بررسی تنوع ژنتیکی و روابط صفات زراعی ,و عملکردی ارقام توتون با استفاده از روش های آماری چند متغیره

نوع مقاله : مقاله پژوهشی

نویسنده

استان مازندران - بهشهر- کیلومتر 15 جاده بهشهر به گرگان- مرکز تحقیقات و آموزش توتون تیرتاش.

10.22034/plant.2026.145897.1203

چکیده

مقدمه: توتون (Nicotiana tabacum L.)، یکی از محصولات با ارزش کشاورزی و صنعتی است که اطلاعات کمی درباره تنوع آن وجود دارد. بررسی تنوع ژنتیکی، یک عامل مهم در اجرای برنامه­های به­نژادی است. به‌دلیل نیاز به­نژادگران به منابع وسیع خزانه ژنتیکی برای انجام فعالیت­های اصلاحی روی گیاهان زراعی، شناسایی عوامل و خصوصیات زراعی مؤثر بر افزایش عملکرد و بررسی تنوع و روابط ژنتیکی بین آن­ها، امری ضروری به نظر می­رسد. در این راستا، این تحقیق با هدف بررسی تنوع ژنتیکی، گروه­بندی و روابط صفات مهم زراعی و عملکردی توتون با استفاده از همبستگی، تجزیه خوشه­ای و تجزیه به عامل­ها اجرا گردید.
مواد و روش­ها: در این تحقیق، تعداد 26 رقم توتون تیپ گرمخانه­ای، شامل (10 لاین و 16 هیبرید F1)، در تابستان سال زراعی 1404 در مزرعه مرکز تحقیقات و آموزش توتون تیرتاش در قالب طرح بلوک‌های کامل تصادفی با 3 تکرار کشت و بررسی شدند. صفات زراعی و عملکردی مورد مطالعه شامل: طول و عرض برگ (سانتی­متر)، تعداد برگ، ارتفاع بوته (سانتی­متر)، قطر ساقه (میلی­متر)، شاخص کلروفیل، تعداد روز تا گل­دهی، ضریب سطح برگ، شاخص شکل برگ، وزن سبز، عملکرد برگ خشک، متوسط قیمت و درآمد در هکتار بودند. تجزیه تجزیه واریانس (ANOVA) برای کلیه صفات مورد مطالعه، بر اساس مدل آماری طرح بلوک­های کامل تصادفی در سه تکرار  بر اساس میانگین داده­ها، صورت گرفت. سپس، تجزیه­های آماری چندمتغیره برای داده­های بدست آمده مورد استفاده قرار گرفتند. به‌منظور ارزیابی میزان ارتباط بین صفات مورد مطالعه، ضرایب همبستگی ساده پیرسون بین آن­ها برآورد گردید. تجزیه خوشه­ای با استفاده از مربع فاصله اقلیدسی و روش Ward انجام شد. برای درک روابط علت و معلولی بین صفات، شناسایی عامل­های مشترک بر صفات و مشخص شدن روابط گروهی بین متغیرها از تجزیه به عامل­ها به‌روش مؤلفه­های اصلی و چرخش وریماکس استفاده شد. کلیه محاسبات آماری با استفاده از نرم افزارهای Excel، (1/9)SAS  و XLSTAT 2016 انجام شد.
یافته­ها: نتایج تجزیه واریانس نشان داد که در سطح احتمال پنج درصد، تفاوت‌های معنی‌داری از نظر آماری میان ژنوتیپ‌ها در خصوص تعداد برگ و وزن برگ سبز وجود دارد؛ همچنین در مورد صفات ارتفاع گیاه، میزان کلروفیل، تعداد روز تا گلدهی، عملکرد ماده خشک، میانگین قیمت و درآمد، تفاوت معنی‌داری در سطح احتمال  یک درصد مشاهده شد. به‌عبارت دیگر بین ارقام از نظر این صفات، تنوع وجود دارد. با توجه به اینکه صفت عملکرد برگ خشک، به‌عنوان عملکرد کل گیاه توتون محسوب شده و سایر صفات زراعی با آن رابطه دارند، لذا وجود تنوع از لحاظ این صفت حائز اهمیت بوده و می­تواند در برنامه­های اصلاحی مورد استفاده قرار گیرد. با بررسی تجزیه همبستگی بین صفات مورد مطالعه، صفات ارتفاع بوته و عملکرد، همبستگی مثبت و معنی­دار با عملکرد خشک نشان دادند. تجزیه خوشه­ای، موجب طبقه­بندی ارقام توتون مورد مطالعه، به سه گروه مختلف به‌ترتیب با 16، 5 و 5 ژنوتیپ گردید. نتایج تجزیه به عامل­ها بر اساس تجزیه به مؤلفه­های اصلی نشان داد که پنج عامل اول، در مجموع، 9/78 درصد از تغییرات داده­های کل صفات بین ارقام را توجیه کردند.
نتیجه­ گیری: به‌طور کلی، تنوع ژنتیکی قابل­توجهی بین ژنوتیپ­های مختلف مورد مطالعه از نظر صفات زراعی و عملکردی مشاهده شد. این نتایج، می­تواند در برنامه­های به­نژادی توتون گرمخانه­ای برای انتخاب ارقام مناسب و نیز برای افزایش عملکرد برگ خشک مورد استفاده قرار گیرد.

کلیدواژه‌ها


عنوان مقاله [English]

Evaluating genetic diversity and relationships among agronomic and yield traits in tobacco cultivars using multivariate analysis

نویسنده [English]

  • Marziyeh Shazdehahmadi
Mazandaran Province - Behshahr - 15th kilometer of Behshahr-Gorgan road - Tirtash Tobacco Research and Education Center.
چکیده [English]

Introduction: Tobacco (Nicotiana tabacum L.) is one of the valuable agricultural and industrial crops about which little information exists regarding its diversity. Investigating genetic diversity is an important factor in implementing breeding programs. Due to the need for breeders to have large genetic pool of resources to do breeding activities on crops, it seems necessary to identify factors and agronomic traits that affect yield increase and to investigate the genetic diversity and relationships between them. In this regard, this study was conducted with the aim of investigating the genetic diversity, grouping, and relationships of important agronomic and functional traits of tobacco using correlation, cluster analysis, and factor analysis.
Materials and Methods: In this study, 26 Flue-cured tobacco cultivars, including 10 lines and 16 F1 hybrids were cultivated and studied during the summer of 2025 at the Tirtash Tobacco Research and Education Center farm in a randomized complete block design (RCBD) with 3 replications. The agronomic and functional traits studied included: leaf length and width (cm), Leaf numbers, plant height (cm), stem diameter (mm), chlorophyll index, number of days to flowering, leaf area coefficient, leaf shape index, green weight, dry leaf yield, average price and income per hectare. Analysis of variance (ANOVA)for all studied traits was performed based on the statistical model of a randomized complete block design in three replications based on the mean of the data. Then, multivariate statistical analyses were used for the obtained data. In order to evaluate association analysis between the studied traits, Pearson's simple correlation coefficients were estimated. Cluster analysis was performed using squared Euclidean distance and Ward's method. In order to understand the cause-and-effect relationships between traits, identify common factors affecting traits, and determine group relationships between variables, factor analysis using the Principal Component Analysis (PCA) and varimax rotation was used. All statistical calculations were performed using Excel, SAS 9.1, and XLSTAT 2016 software.
Results: The results of the analysis of variance showed that there were statistically significant differences among genotypes for in leaf number and green leaf weight at 5% probability level, and for plant height, chlorophyll, number of days to flowering, dry yield, average price and income, there was a statistically significant difference at a 1% probability level. In other words, there is diversity between cultivars in terms of these traits. Considering that the dry leaf yield trait is considered as the total yield of the tobacco plant and other agronomic traits are related to it, therefore, the existence of diversity in terms of this trait is important and can be used in breeding programs. By examining the correlation analysis between the studied traits, the traits plant height and yield showed a positive and significant correlation with dry yield. Cluster analysis led to the classification of the studied tobacco cultivars into three different groups with 16, 5 and 5 genotypes, respectively. The results of factor analysis based on principal component analysis showed that the first five factors, in total, explained 78.9% of the variation in the total trait data between cultivars.
Conclusion: In general, significant genetic diversity was observed among the different genotypes studied in terms of agronomic and performance traits. These results can be used in Flue-cured tobacco breeding programs to select suitable cultivars and also to increase dry leaf yield.

کلیدواژه‌ها [English]

  • Breeding
  • Flue-cured tobacco
  • Multivariate analysis
  • Varimax rotation
  • Yield
Abdi, H., & Williams, L. J. (2010). Principal component analysis. Wiley interdisciplinary reviews: computational statistics, 2(4), 433-459. https://doi.org /10.1002/wics.101
Ahmed, SH., Mohammad, F., Ahmed, Q., & Ullah Khan, M. A. (2014). Assessing genetic variation for morpho-agronomic traits of some native and exotic FCV tobacco genotypes in Pakistan. American-Eurasian journal of agricultural & environmental sciences, 14(5), 428-433. https://doi.org/10.5829/idosi.aejaes.2014.14.05.12329
Butorac, A., Tursiae, I., Butorac, J., Basiae, F., Vuletiae, N., Kisiae, I., & Berdin, M. (2004). The effect of tobacco monoculture and crop rotation on tobacco leaf composition. Apriculturae Conspectus Scientificus, 69(4), 95-101.
Camilca, M., & Yaldiz, G. (2020). Genetic diversity of one cultivar and 29 genotypes of tobacco based on morphological and yield properties. The Journal of Animal & Plant Sciences, 30(2), 442-453. https://doi.org/10.36899/JAPS.2020.2.0038
Chawla, H. S. (2003). Plant biotechnology a practical approach. Science publishers Inc. 302p.  
Darvishzadeh, R., Mousavi Andazaghi, M. J., Fayyaz Moghaddam, A., Abbasi Holasou, H., & Alavi, S. R. (2016). Genetic analysis of morphological traits in oriental tobacco (Nicotiana tabacum L.) by using generation mean analysis. Plant Genetic Researches, 3(2), 11-24. (In Persian). https://doi.org /10.29252/pgr. 3. 2. 11
Farshadfar, E. (2002). Multivariate principles and procedures of statistics. Razi University Publication. 708p. (In persian).
Farsi, M., & Bagheri, A. (2006). Principles of plant breeding. Jihad-e-daneshgahi publications of Mashhad. Mashhad, Iran. 368 pp. (In Persian).
FAO. (2024). Food and agriculture organization of the United Nations statistics. Retrieved from htp//www. FAOSTAT.fao.org/site/562/default.aspx//.
Ganapathi, T., Suprasanna, P., Rao, P., & Bapat, V. (2004). Tobacco (Nicotiana tabacum L.) A model system for tissue culture interventions and genetic engineering. Indian Journal of Biotechnology, 3(2), 171–184.
Goodarzi Mokri, P., Darvishzadeh, R., Maleki Zanjani, B., & Jannat doust, M. (2021). Studying genetic variation in recombinant inbred lines of oriental tobacco based on chemical traits. Journal of Crop Science Research in Arid Regions, 4(1), 183-195. (In Persian). https://doi.org /10.22034/CSRAR.2022.310590.1143
Hatami Maleki, H., Karimzadeh, G. H., Darvishzadeh, R., & Sarrafi, A. (2011). Correlation and sequential path analysis of some agronomic traits in tobacco (Nicotiana tabacum L.) to improve dry leaf yield. Australian Journal of Crop Science, 5(12), 1644- 1648.
Hatami Maleki, H., Karimzadeh, Q., Darvishzadeh, R., & Alavi, R. (2012). Genetic diversity of oriental tobaccos using multivariate statistical methods. Iranian Journal of Field Crops Research, 10(1), 100-106. (In Persian). https://doi.org /10.22067/gsc.v10i1.14409
Hosseinzadeh Fashalami, N., Shahadati Moghaddam, Z., Kiani, GH., Salavati, M. R., Zamani, P., Mahdavi, R., & Alinejad, R. (2015). Investigation of genetic diversity among different oriental tobacco varieties using multivariate methods. Journal of Crop Breeding, 7(5), 126-134. (In Persian).
Jiao, F.C., Xiao, H.Q. Yu, Y.H., Zhang, Y. H., & Lu, X. P. (2007). Gray correlation analysis on the main agronomic characters and yield of the flue-cured tobacco. Journal of Hunan Agricultural University. 33(5), 564-567.
Koochaki, A., Nasiri, M., Jahani-Kandari, M., & Buromand Rezazadeh, Z. (2011). Study biodiversity of Industrial plants. Iranian Journal of Field Crops Research. 9(3), 301-309. (In Persian). https://dx.doi.org/10.22067/gsc.v9i3.11959
Lakshmish, K. J., & Shivanna, H. (1999). Correlation and path analysis in FCV tobacco (Nicotiana tabacum L.). Mysore Journal of Agricultural Sciences, 33(1), 45-48.
Layten, D., & Nielsen, M. T. (1999). Tobacco Production, Chemistry and Technology. Blackwell Science, New York. 467 pp.
Majnoun Hosseini, N., Ghafari, M. T & Alinejad, R. (2023). Effect of chemical fertilizers and farmyard manure on quantitative and qualitative yield of tobacco (Nicotiana tabacum). Plant Production and Genetics, 4(1), 87-94. https://doi.org/10.34785/J020.2022.018
Maruthi Prasad, B. P., Patil, B. R., Geeta, D., & Matiwade, P. S. (2023). Principal component analysis (PCA) and hierarchial clustering in tobacco (Nicotiana tabacum L.) for yield and yield attributing traits. Electronic Journal of Plant Breeding, 14(2), 737-746. https://doi.org 10.37992/2023.1402.062
Mansour Ghanaei, F., Samieezadeh Lahijii, H. A., Rabeie, B., & Shoaii Deilami, M. (2012). Syudy the relationship between yield and yield components in tobacco (Nicotiana tabacum L.) varieties. Agronomy Journal (Pajouhesh & Sazandegi), 103, 29-37. (In Persian). https://doi.org/10.22092/aj.2014.101202
Moghaddam, M., Mohammadi, S. A., & Aghaee Sarbarzeh, M. (2009). Multivariate Statistical Methods, APrimer. Parevar Press. pp. 280. (In Persian).
Mohsenzadeh Golfazani, M., Samizadeh Lahiji, S., Aalami, A., Shoaie Deilami, M., & Talesh Sasani, S. (2012). Grouping of flue-cured tobacco genotypes based on multivariate statistical analysis. Iranian Journal of Crop Sciences, 14 (3), 250-262 (In Persian). https://doi.org /20.1001.1.15625540.1391.14.3.4.9
Mohsenzadeh Golfazani, M., Samizadeh Lahiji, S., Aalami, A., Shoaie Deilami, M., & Talesh Sasani, S. (2012). Study of relationship between Yield and Yield components in tobacco genotypes using Path Analysis Method. Journal of Crop Breeding Research, 4(9), 27-40. (In Persian). https://doi.org/10.22092/aj.2014.101202
Moro, J., & Denis, J. B. (1997). Selecting genotypes by clustering for qualitative genotype by environment interaction using a non- symmetric inferiority score. Agronomy Journal, 17(5), 283-289.
Porkabiri, Z., Sabaghnia, N., Ranjbar, R., & Hatami Maleki, H. (2019). Genetic variation of some tobacco (Nicotiana tabacum L.) genotypes by morphological traits. Scientia Agriculturae Bohemica, 50(1), 1-7. https://doi.org /10.2478/sab-2019-0001
Shah, S. M. A., Ashfaq Shfaq, A., Fida, M., Hidayat, R., Woras, G., Khan, M. Y., & Jan, D. (2009). Genotypic evaluation of some flue-cured Virginia tobacco genotypes for yield and quality traits. Sarhad Journal of Agriculture, 24(4), 607–611.
Sharma, S. (1996). Applied multivariate techniques. 1nd ed. John Wiley and Sons, New York. 493 Pp.
Samudin, S., & Fakultas, P. (2003). Correlation among characteristics of some tobacco penotypes and its implication.in selection. Journal Aproland, 10(2), 112-118.
Zhu, J., Xiao, B.G., Lu, X.P., Bai, Y. F., & Li, Y. P. (2006). Genetic and correlation analysis for agronomic traits in flue-cured tobacco (Nicotiana tabacum L.). College of Agriculture and Biotechnology, 28(3), 317-32.